Configuring User Accounts - Cisco RV215W Administration Manual

Administering Your

Configuring User Accounts

STEP 4
Configuring User Accounts
STEP 1
STEP 2
STEP 3
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 1—Cisco Confidential
Password Aging
Password aging time
Click Save.
The Cisco RV215W supports two user accounts for administering and viewing
settings: an administrative user (default user name and password: "cisco") and a
"guest" user (default user name: "guest").
The guest account has read-only access. You can set and change the username
and password for both the administrator and guest accounts.
To configure the user accounts:
Choose Administration > Users.
In the Account Activation field, check the boxes for the accounts you want to
activate. (The admin account must be active.)
(Optional) To edit the administrator account, under Administrator Account Setting,
check Edit Administrator Settings. To edit the guest account, under Guest
Settings, check Edit Guest Settings. Enter the following information:
New Username
Old Password
New Password
Retype New Password
Check Enable to expire passwords after a
specified time.
Enter the number of days after which the password
expires (1–365). The default is 180 days.
Enter a new username.
Enter the current password.
Enter the new password. We recommended that
you make sure that the password contains no
dictionary words from any language, and is a mix of
letters (both uppercase and lowercase), numbers,
and symbols. The password can be up to 64
characters long.
Re-enter the new password.
7
108