Sony CM-B1200 Operating Instructions Manual page 71

Setting the roaming alert [F72]
Your phone is roaming when you use it outside of the home area.
Roaming access to a different carrier and the types of calls you can make
varies with the agreement between your "home" carrier and the current
serving carrier. Check with your service provider for details about
roaming in a specific area.
1
Push to select "Roam Alert"
from the Network menu.
The Roam Alert menu appears.
2
Turn to select "on" or "off".
3
Push to enter the new setting.
The standby display reappears.
When you enter another service area
The roaming icon ( R ) appears on the display. A
beep accompanies the icon if you have turned the
roam alert on.
If you leave any valid service area
The following display appears, indicating that you
are outside the area serviced by your "home"
carrier or other valid service areas. The out-of-
service icon ( ) also appears.
If you are in an analog roaming area
The message "Analog Roam" is displayed on the
standby display. This message indicates that you
are outside your home area, and that you are in an
analog service area.
B2200 56-76draft3 71
F72
ROAM ALERT
OFF
:Choices
:To Set
Entering
Roam
Service
Area
Leaving
Service
Area
My Phone
Analog Roam
:Saved #s
:Features
71
8/21/98, 12:14 PM