Page 1
Ethernet Environmental Monitoring Unit Quick Installation Guide V 2.6 www.jacarta.com T. +44 (0) 1672 511125 Email: support@jacarta.com...
Page 2
If applicable, connect external sensors to the screw terminals on the EMD. Insert the power connector into the interSeptor power inlet. Plug in the power adapter of the interSeptor into the power socket. Follow the “Configuring interSeptor via the serial port” instructions.
Page 3
NOTE: The default IP address of interSeptor is 172.17.XXX.ZZZ where XXX and ZZZ are the last two pairs of the MAC address of the interSeptor in decimal. The MAC address can be found on the bottom of the interSeptor (e.g.
Page 4
Start your web browser, enter the interSeptor’s IP address in the address text box, and press enter to display the home page Default ID: interSeptor Default Password: admin NOTE: If the Temperature and Humidity values do not appear then please ensure Java Runtime Environment (JRE) is up to date (www.java.com).