Siemens SINUMERIK 840D sl Operating Manual page 218

Tool management
10.5 Tool list
Icons in the tool list
Icon/
Marking
Tool type
Red "X"
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green frame
Magazine/location number
Green double arrow
Gray double arrow (con-
figurable)
Red "X"
Procedure
218
1. Select the "Parameter" operating area.
2. Press the "Tool list" softkey.
The "Tool List" window opens.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip provides a
short description.
The tool is preselected.
The magazine location is positioned at the change position.
The magazine location is positioned at the loading position.
The magazine location is disabled.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal