Charging The Battery - Motorola 0171970B02 Manual

Bluetooth Profiles
The following table provides guidelines regarding Audex Motorola Jacket
features that depend on the Bluetooth profiles supported and used by the phone
or music device:
Profile
HFP (Handsfree Profile) Telephony / Call management: operations
related to placing/ receiving phone calls
A2DP (Advanced Audio Stereo music streaming
Distribution Profile)
AVRCP (Audio Video Remote music control (for example, ability to
Remote Control Profile) remotely Play / Pause or Stop music)
There are three typical scenarios for using the Audex Motorola Jacket:
• Listen to music and make/receive calls from a compatible
Bluetooth-enabled cell phone with both Advanced Audio Distribution
Profile (A2DP) and Handsfree Profile (HFP).
• Make/receive phone calls from a compatible Bluetooth-enabled cell
phone with Handsfree Profile (HFP), and listen to music from a
Bluetooth-enabled music source with Advanced Audio Distribution
Profile (A2DP).
• Make/receive phone calls from a compatible Bluetooth-enabled cell
phone with Handsfree Profile (HFP), and listen to music from a wired
iPod music source.
6
Description

Charging the Battery

Your Audex system utilizes a rechargeable battery that is installed in the Chest
Module. The battery powers all electronic components that come with your
jacket. Follow these steps to charge the battery:
1 If necessary, install the proper
country power adapter on the
wall charger connector as
shown in the example.
The following power adapters
are provided with your jacket:
• UK (SYN7455A)
• Europe (SYN7456A)
Plug the charger into the
2
battery's charging port as
shown.
Be sure to align the plug
correctly. If the plug does not
connect to the unit easily, try
flipping it over and re-inserting.
Plug the charger into an electrical wall outlet.
3
The red indicator light turns on when the battery is charging. When the
battery is fully charged (about 2-3 hours), an additional green indicator light
turns on.