General Settings — Psm; Adjusting The Sound - JVC KD-G635 Instructions Manual

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
2
Indication, [Range]
2
BAS* (bass), [–06 to +06]
Adjust the bass.
2
MID* (mid-range), [–06 to +06]
Adjust the mid-range frequencies sound level.
2
TRE* (treble), [–06 to +06]
Adjust the treble.
3
FAD* (fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL* 4 (balance), [L06 to R06]
Adjust the left and right speaker balance.
2
LOUD* (loudness), [LOUD ON or LOUD OFF]
Boost low and high frequencies to produce a well-
balanced sound at low volume level.
1
SUB.W* (subwoofer), [00 to 08, initial: 04]
Adjust the subwoofer output level.
VOL (volume), [00 to 30 or 50*
Adjust the volume.
*
Displayed only when "L/O MODE" is set to "WOOFER"
1
(see page 13).
*
When you adjust the bass, mid-range, treble, or
2
loudness, the adjustment you have made is stored
for the currently selected sound mode (iEQ) including
"USER."
*
If you are using a two-speaker system, set the fader
3
level to "00."
*
This adjustment cannot affect the subwoofer output.
4
*
Depending on the amplifier gain control setting. (See
5
page 13 for details.)
12
5
]
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table that follows.
1
2
Select a PSM item.
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.