Advertisement
Charge the Terminal
Note: The TAM-442 terminal needs to be charged before
installation.
If you have a TAM-442 Satellite Terminal, you can charge the
battery with the single mains charger accessory or from the
vehicle power supply. See the user manual for information on
the available charging accessories.
Either charging method takes at least 7 hours to fully charge
the battery. You can charge the terminal from a power source
ranging from 9.6 V to 30 V, limited to 2 A.
Charging Status LED
Orange
Green
Red
1 Connect the TAM-442 to either the single mains charger
or to the vehicle charging cable.
2 Charge for at least 7 hours to make sure you have a fully
charged battery. The Charging Status LED will turn green.
4
TAM-401 Series Satellite Terminal Quick Start Guide
Description
Battery is charging.
Charging is complete.
Battery is not charging due to a fault
or it is outside charging temperature
range.
Advertisement
