Mtm800Fug Et Accessories-To-Model Chart - Motorola MTM800 FuG Installation Manual

2
Requires Junction Box, GMLN5089_.
3
The cable, PMKN4104_, is only compatible when a Data Expansion Head Enhanced is not fitted as
part of a remote mount configuration. In this configuration, access to the TETRA PEI for IP Packet
Data and SDS services is available on the Data Expansion Head Enhanced and the Active Data Cable
PMKN4104_ cannot be used.
4
Used both for programming and data purposes.
CAUTION:
Complex installations requiring extended cable runs and Remote Mount Control Heads with
Audio Accessories such as the Telephone Style Handset (HLN7016_) may benefit from careful
routing of cables, and in some cases additional Electro Magnetic Compatibility (EMC) reduction
techniques such as using Ferrite or Toroid accessories. Suitable examples of Ferrite or Toroid
accessories are as follows:
• Ferrite Clamp, Part Number 91012044001, 91012044002, or 91012044003
• Toroid, Part Number 01015001001
2.6

MTM800FuG ET Accessories-to-Model Chart

NOTICE: Contact your service provider for further information on additional and specialized
accessories supported by MTM800 FuG ET.
Table 26: Control Heads
Accessory
Ethernet Data Expansion Control Head
Ethernet Remote Control Head (eCH) Roman
Ethernet Telephone Style Control Head (TSCH) Roman PMWN4025_
Table 27: Microphones
Accessory
BMI Hearer Speaker Microphone
Compact Fist Microphone with a clip
Desktop Microphone, Mobile Microphone Port
Fist Microphone with a clip
Hearer Speaker Microphone with Earphone Jack and
Emergency Button
Heavy Duty Microphone
Push-Button PTT, for use with RMN5054_ or
PMMN4087_
Smart Visor Microphone
Visor Microphone
Send Feedback
2
Chapter 2: Model Information and Accessories
Part Number M1
PMLN7009_
PMWN4024_
Part Number M1
PMMN4070_ x
RMN5107_ x
RMN5106_ x
GMMN4063_ x
PMMN4086_ x
RMN5111_ x
RLN5926_ x
RMN5054_ x
PMMN4087_ x
68015000553-KC
M2 M3 M4
x
x
x
M2 M3 M4
x x x
x x x
x x
x x
x x x
x x x
x x x
x x x
x x x
29
M5
M5
x
x
x
x
x
x
x