Table of Contents
Advertisement
performance-mgmt resources memory
performance-mgmt resources memory
To configure memory consumption limits for performance management (PM), use the performance-mgmt
resources memory command in global configuration mode. To restore the default memory consumption
limits, use the no form of this command.
performance-mgmt resources memory max-limit kilobytes min-reserved kilobytes
no performance-mgmt resources memory
Syntax Description
max-limit kilobytes
min-reserved kilobytes
Command Default
max-limit—50000 kilobytes
min-reserved—10000 kilobytes
Command Modes
Global configuration
Command History
Release
Release 3.2
Usage Guidelines
Use the performance-mgmt resource memory command to ensure that the total memory consumed by data
buffers in PM does not exceed a maximum limit and that any new PM data request does not cause available
memory in the system to fall below a certain threshold.
Task ID
Task ID
monitor
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
382
Specifies the maximum amount of memory (specified with the kilobytes argument)
that the PM statistics collector can use for serving data collection requests. Range
is 0 to 4294967295 kilobytes.The default is 50000 kilobytes.
Specifies a minimum amount of memory (specified with the kilobytes argument)
that must remain available in the system after allowing a new PM data collection
request. Range is 0 to 4294967295 kilobytes. The default is 10000 kilobytes.
Modification
This command was introduced.
Operations
read, write
Performance Management Commands
OL-24735-01
Advertisement
Table of Contents
