Patterson Medical Midland 4512E Operation And Service Manual

MODEL 4512E & 4512EC: Midland
®
Stand-In Table
Operation and Service Guide
Midland® by
Sammons Preston
4 Sammons Court
Bolingbrook, IL 60440-4989
(630) 226-1300
TABLE OF CONTENTS
• Purpose of Stand-In Table
Page 1
• Setup
Pagel
• Method of Operation
Page 2
• Cleaning
Page 2
• Preventative Maintenance
Page 2
• Trouble Shooting Guide
Page 3
• Warranty
Page 3
• Service
Page 3
• Technical Specifications and Replacement Parts
Page 4
PURPOSE OF HI-LO TREATMENT TABLE
The purpose of the Stand-In Table is to assist in moving the patient from a sitting position in
a wheelchair to a standing position.
SET UP
Uncrate the table and check to ensure that all parts listed are included in your shipment.
Inspect the power cord, plug, controls, frame and upholstery for damage.
Model 4512E is completely assembled and ready to use. If any part is missing (see
illustration drawings and parts list on page 5) or damaged, please call customer service at
Sammons Preston at 1-800-323-5547.
Set up the table in a location that allows ample clearance around, above, and below the table,
and has access to the needed power supply. Securely lock all four casters for stability. The
unit is shipped with a 3-pole male hospital grade 15 amp plug (110V models). To maintain
adequate grounding, the unit must be plugged into a 3-pole receptacle (110V models)
(preferably a hospital grade) that is correctly wired to the building power system. 3 pole
male plugs are provided for 220V models due to the variation of receptacles. Illustration A
shows the correct color connections of a hospital grade cord to a 3 pole plug (220V models).
1