Add Tagged Or Untagged Ports To An 802.1Q-Based Vlan - NETGEAR XS512EM User Manual

12- or 24-Port 10-Gigabit/Multi-Gigabit Switch Models XS512EM and XS724EM
Otherwise, see Step
A pop-up window opens, informing you that the current VLAN settings will be lost.
7. Click the OK button.
The pop-up window closes.
8. Click the Apply button.
Your settings are saved.
The VLAN Identifier Setting table displays.
9. In the VLAN ID field, enter a VLAN ID.
You can enter a VLAN ID from 1 to 4093.
10. Click the Add button.
The new VLAN is added to the VLAN Identifier Setting table.
After you create a new VLAN ID, use the VLAN membership option to add ports to the VLAN. (Select
VLAN > 802.1Q > Advanced > VLAN Membership. See also
802.1Q-Based VLAN
Note To delete a VLAN, select the check box for the VLAN and click the Delete button.

Add Tagged or Untagged Ports to an 802.1Q-Based VLAN

After you define a VLAN ID using the advanced 802.1Q VLAN option (see
an Advanced Configuration
While you add ports to a VLAN, you can specify whether the ports must be tagged or untagged. Port tagging
allows a port to be associated with a particular VLAN and allows the VLAN ID tag to be added to data packets
that are sent through the port. The tag identifies the VLAN that must receive the data.
By default, all ports are untagged.
To add tagged or untagged ports to an 802.1Q-based VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select VLAN > 802.1Q > Advanced > VLAN Configuration.
9.
on page 29.)
on page 28), you must add ports to the VLAN.
Use VLANS for Traffic Segmentation
Add Tagged or Untagged Ports to an
Create 802.1Q-Based VLANs in
29