Cisco ASR 9000 Series Command Reference Manual page 67

Tech-Support Commands
APS
No APS Group Configured
Protect
Rx(K1/K2) : 0x00/0x00
Tx(K1/K2) : 0x00/0x00
Remote Rx(K1/K2): 01/0
BER thresholds:
TCA thresholds:
Optics type: OC3 SR-1/STM1 MM
Clock source: internal (actual) internal (configured)
Rx S1: 0xf
Optical Power Monitoring (accuracy: +/- 1dB)
Rx power = 0.0206 mW, -16.9 dBm
Tx power = 0.0000 mW, -inf dBm
Tx laser current bias = 0.0 mA
Port SONET0/6/4/0:
Status: Down
Loopback: None
SECTION
LOF = 0
LINE
AIS = 0
PATH
AIS = 0
LOP = 0
PLM = 0
Line delays trigger:
Path delays trigger:
Last clearing of "show controllers SONET" counters never
Detected Alarms: SLOS
Asserted Alarms: SLOS
Mask for Detected->Asserted: SLOF LAIS SF_BER SD_BER LRDI PLOP PAIS PRDI PUNEQ
Detected Alerts: None
Reported Alerts: None
Mask for Detected->Reported: B1-TCA B2-TCA B3-TCA
Alarm reporting enabled for: SLOS SLOF SF_BER PLOP
Alert reporting enabled for: B1-TCA B2-TCA B3-TCA
Framing: SONET
SPE Scrambling: Enabled
C2 State: Stable
S1S0(tx): 0x0
PATH TRACE BUFFER : UNSTABLE
Remote hostname :
Remote interface:
Remote IP addr
APS
No APS Group Configured
Rx(K1/K2) : 0x00/0x00
Tx(K1/K2) : 0x00/0x00
Remote Rx(K1/K2):
BER thresholds:
TCA thresholds:
Optics type: None
Clock source: internal (actual) line (configured)
Rx S1: 0x0
Channel 0 DISABLED
Remote Tx(K1/K2): 01/0
SF = 10e-3 SD = 10e-6
B1 = 10e-6 B2 = 10e-6
Tx S1: 0xf
LOS = 1
RDI = 0
RDI = 0
NEWPTR = 0
TIM = 0
0 ms clear:
0 ms,
C2_rx = 0xFF (255)
S1S0(rx): 0x0 / Framing Derived
:
1/ Remote Tx(K1/K2):
SF = 10e-3 SD = 10e-6
B1 = 10e-6 B2 = 10e-6
Tx S1: 0xf
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
B3 = 10e-6
BIP(B1) = 0
FEBE = 0 BIP(B2) = 0
FEBE = 0 BIP(B3) = 0
PSE = 0 NSE
UNEQ = 0
10000 ms
0 ms (configured), clear:
C2_tx = 0x16 (22) / Scrambling Derived
1/
B3 = 10e-6
show tech-support aps
= 0
10000 ms
61