Philips LTC 2622/90 Installation Instruction
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Multiplexer
  5. LTC 2622/90
  6. Installation instruction
Philips LTC 2622/90 Installation Instruction

Philips LTC 2622/90 Installation Instruction

Ltc 2600 series video multiplexers
Hide thumbs
Table of Contents

Advertisement

Quick Links

LTC 2600 Series
Video Multiplexers
Eng
Philips
Communication,
Security & Imaging

Advertisement

Table of Contents
loading

Related Manuals for Philips LTC 2622/90

Summary of Contents for Philips LTC 2622/90

  • Page 1 LTC 2600 Series Video Multiplexers Philips Communication, Security & Imaging...

  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS 16. Servicing - Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 1. Read Instructions - All the safety and operating instructions should be read before the unit is operated.

  • Page 3: Safety Precautions

    Safety Precautions SECURITE C A U T I O N A T T E N T I O N R I S K O . E L E C T R I C R I S Q U E D E C H O C E L E C T R I Q U E . S H O C K .
  • Page 4 SICHERHEITSVORKEHRUNGEN PRECAUCIONES DE SEGURIDAD Debido a limitaciones de espacio, esta etiqueta puede aparecer en la parte Aus Platzgründen kann diese Warnung auf der Unterseite des Gerätes inferior de la unidad. angebracht sein. El símbolo representado por un relámpago con punta de flecha Das Blitzsymbol im gleichseitigen Dreieck soll den Benutzer auf dentro de un triángulo equilátero, se muestra con el objetivo de nicht isolierte “Hochspannung”...

  • Page 5: Table Of Contents

    LTC 2600 Series Contents IMPORTANT SAFEGUARDS ..........3 Safety Precautions .

  • Page 6: Section 1: Introduction To The Ltc 2600 Series

    If any items appear to have been damaged in shipment, replace the item(s) properly in the shipping carton and notify the shipping company. If any items are missing, notify your Philips Communication, Security & Imaging Sales Representative or Customer Service Representative.
  • Page 7 To identify your specific LTC 2600 Series Video Multiplexer model, refer to the following chart which also provides basic operating specifications: Model No. Mode Rated Voltage Voltage Range Power 6-channel: Color LTC 2622/90 Duplex 120/230 VAC, 50/60 Hz 108 to 253 30 W 9-channel: Monochrome Duplex 120/230 VAC, 50/60 Hz...

  • Page 8: Section 2: Installing The Video Multiplexer

    LTC 2600 Series Section 2 Installation SECTION 2: INSTALLING THE VIDEO MULTIPLEXER 2.1 Mounting The multiplexer is supplied as a desktop unit. If desired, the unit may be rack mounted using the included rack mount kit. 2.2 Connecting the Video Multiplexer System Refer to Figures 2A, 2B, and/or 2C for details on the input/output connections supplied by the multiplexer.
  • Page 9 LTC 2600 Series Section 2 Installation **From Console port of System4 to RS-232 port of Philips VCRs. 9-pin D sub 25-pin D sub Jumper 1+6 or purchase a S1383 cable. VCR IN MON B MON A CONSOLE VCR IN VCR OUT...

  • Page 10: Guide To The Multiplexer Controls

    LTC 2600 Series Section 2 Installation 2.3 Guide to the Multiplexer Controls Before attempting any multiplexer programming, you should become familiar with the function of the multiplexer controls. This section provides a summary of the front panel controls and indicators. Refer to Figures 2D, 2E, and/or 2F for the appropriate front panel illustration.
  • Page 11 LTC 2600 Series Section 2 Installation Front Panel Indicators Indication POWER Power supplied to unit Primary indication: Alternate functions (Flashing): Camera- to-cameo mode (ALT + SELECT) RECORD Record mode enabled (LED LIT) PLAYBACK Playback mode enabled (LED LIT) VCR Test VCR Test enabled (LED LIT) MON B Monitor B enabled (Front panel keys...

  • Page 12: Section 3: Programming - Quick Setup

    NOTE: The programming section of this manual is divided into 3 parts: QUICK SETUP, ADVANCED SETUP, and System4 ADVANCED SETUP. Programming of all Philips LTC 2600 Series multiplexers is included in the QUICK SETUP and ADVANCED SETUP sections. Additional setup parameters for the System4 version multiplexers only are included in the System4 ADVANCED SETUP section.
  • Page 13 LTC 2600 Series Section 3 Programming - Quick Setup Select TIME/DATE from the QUICK SETUP menu. Enter the time format (12 or 24 hours), time, date format (dd/mm/yyyy; mm/dd/yyyy; yyyy/mm/dd), and date information as requested. (Refer to the following sample menus which correspond to the on-screen Time/Date menus—read each row from left to right.) When you have finished programming all time/date parameters, use the ZOOM key to return to the QUICK SETUP menu.
  • Page 14 LTC 2600 Series Section 3 Programming - Quick Setup From the QUICK SETUP menu, select VCR SETUP (sample menus are shown below). Then select RECORD SETUP to specify the VCR model and time-lapse mode. RECORD SETUP QUICK SETUP 3:00 VCR SETUP *VCR OUT* SETUP 1 SETUP 1 SETUP 1...
  • Page 15 LTC 2600 Series Section 3 Programming - Quick Setup Optional VCR SETUP Programming: PLAYBACK FORMAT To play back a tape that has been previously recorded on a nonPhilips multiplexer, use the PLAYBACK FORMAT option to program the unit accordingly. From the VCR Setup menu, select the PLAYBACK FORMAT option, then select the appropriate tape format.

  • Page 16: Section 4: Programming - Advanced Setup

    LTC 2600 Series Section 4 Programming - Advanced Setup SECTION 4: PROGRAMMING – ADVANCED SETUP NOTE: Please refer to Page 13 for details. 4.1 Using ADVANCED SETUP For specialized multiplexer system operation, use the ADVANCED SETUP programming menus to customize your system configuration.
  • Page 17 LTC 2600 Series Section 4 Programming - Advanced Setup For TIME/DATE programming, please refer to the information provided in the QUICK SETUP section of this manual. Programming this parameter is identical for both ADVANCED SETUP and QUICK SETUP. For AUTOSET programming, please refer to the information provided in the QUICK SETUP section of this manual.
  • Page 18 LTC 2600 Series Section 4 Programming - Advanced Setup Alternate Method for Synchronizing the VCR The alternate method for synchronization of the multiplexer and the VCR requires selecting the appropriate VCR model, then selecting the identical setting in the VCR time-lapse menu. •...
  • Page 19 LTC 2600 Series Section 4 Programming - Advanced Setup Custom VCR Option If Vext option will not be used and programming VCR cannnot be accomplished through Quick Setup, choose the Custom VCR option. Up to six custom set ups can be stored in the VCR list.The field rate must be determined for each of the VCR time-lapse modes.
  • Page 20 LTC 2600 Series Section 4 Programming - Advanced Setup VCR OUT Option The VCR OUT option (in the RECORD SETUP menu, as shown below) is used to program the function of the VCR output relay. The VCR OUTPUT relay controls external devices such as changing the recording speed when an action and/or alarm occurs.
  • Page 21 (3 to 60 seconds). Press the <left / >right keys to increment/decrement. NOTE: For 6-channel models only (LTC 2622/90). ACTION LIST: Selects cameras to have motion detection. Entering the ACTION LIST menu enables this list to be customized to a specific configuration.
  • Page 22 LTC 2600 Series Section 4 Programming - Advanced Setup WALKTHROUGH: The walkthrough section of the Action Setup is used to set action zone sensitivity and target size within the scene to provide greater accuracy in defining the target (i.e. eliminating nuisance alarms). ACTION SETUP Camera 1 SETUP 1...
  • Page 23 Save:SELECT Exit:ZOOM NOTE: For 6-channel models only (LTC 2622/90). ALARM DISPLAY: Alarm display is available for MON A and MON B. Alarm display MON A settings will allow customized alarm viewing and camera pre-position showing. MON B will show full screen on alarm and at 2 second intervals when multiple alarms are activated.
  • Page 24 • Camera sequencing is programmable for cameo 1 of the 5+1 multiscreen display mode of the 6-channel models LTC 2622/90 (as shown below). Sequencing Return to the ADVANCED SETUP menu. Select the CONFIGURE SETUPS option.The LTC 2600 Series multiplexer has the capability to provide up to six individually configured setups that are retained in the multiplexer memory.
  • Page 25 LTC 2600 Series Section 4 Programming - Advanced Setup 10. Return to the ADVANCED SETUP menu. Select the CONFIGURE DISPLAY option. The monitor displays can be configured to show time/date and camera titles.The format of the text can be changed, as well as the border of the cameo picture.
  • Page 26 LTC 2600 Series Section 4 Programming - Advanced Setup Return to the ADVANCED SETUP menu. Select the DEFAULT SETTINGS Option.The multiplexer is supplied with default parameters that are set up at the factory (see Appendix at the back of this manual). These settings allow normal operation of the multiplexer, enabling easy installation, setup, and use.

  • Page 27: Section 5: System4 Programming

    LTC 2600 Series Section 5 System4 Programming SECTION 5: System4 PROGRAMMING The System4 multiplexers offer additional programming options for greater system customization. System4 multiplexer initial programming requirements are outlined in the QUICK SETUP and/or ADVANCED SETUP sections of this manual. Additional features outlined in this section: VCR SETUP, ACTION SETUP, ALARM SETUP, CONFIGURE DISPLAY, CAMERA SEQUENCES, PC PRINTER SETUP, LOG, PASSWORD, and EXPAND SYSTEM are accessed through the ADVANCED SETUP menu as shown below.

  • Page 28: System4 Advanced Setup: Action Setup

    LTC 2600 Series Section 5 System4 Programming RECORD SETUP MON B is similar to the RECORD SETUP VCR OUT programming. RECORD SETUP VCR SETUP *MON B* SETUP 1 SETUP1 >VEXT INPUT RECORD SETUP *VCR OUT* >RECORD SETUP *MON B* SELECT VCR PLAYBACK FORMATLTC2600 TIME LAPSE 2 hr - SP...

  • Page 29: System4 Advanced Setup: Configure Display

    LTC 2600 Series Section 5 System4 Programming • Multi: If Multi is selected, it will display the multiscreen view as it was originally programmed in the live view setup. Four separate cameras may be selected for pre-position activation during alarm input. Pre-positions programmed for selected cameras may be from 1-16 if the camera selected is a pan/tilt unit with pre-position option or an AutoDome.

  • Page 30: System4 Advanced Setup: Pc Printer Setup

    CCL:When connected to a PC, CCL commands may be used for programming and controlling the multiplexer. • VCR:When connected to selected Philips VCRs, LTC 2601/00 or LTC 2602/00 keyboard will control primary VCR functions (Record, Play, Stop, Fast Forward, Rewind).

  • Page 31: System4 Advanced Setup: Log

    LTC 2600 Series Section 5 System4 Programming 5.7 System4 Advanced Setup: Log The LOG option allows the operator to view a history of action, recording, and alarm activity. Up to 300 events are retained in the log. The AUTOPRINT command will automatically print log events, therefore providing a larger event history.

  • Page 32: Section 6: Operating The Ltc 2600 Series

    LTC 2600 Series Section 6 Operation SECTION 6: OPERATING THE LTC 2600 SERIES VIDEO MULTIPLEXER Operating the LTC 2600 Series Video Multiplexer requires a general knowledge of basic and combined operating modes as described in this section. Basic operating modes are LIVE (Display), RECORD, and PLAYBACK. Duplex multiplexer models provide combinations of the basic modes (e.g.

  • Page 33: Record

    LTC 2600 Series Section 6 Operation Freeze: Holds the selected camera picture on either full screen or cameo. The currently selected camera image will be frozen, and “FREEZE” will be displayed on the screen. This feature allows closer inspection of any part of the selected image.

  • Page 34: Security Lockout

    LTC 2600 Series Section 6 Operation 6.5 Security Lockout The LTC 2600 Series Multiplexer provides three levels of access for operation: (1) Full Access, (2) Limited Access, and (3) Lockout (i.e. No access/no front panel manipulation possible). The key commands controlling this feature are as follows: •...

  • Page 35: Section 7: System4 Enhanced Operation

    LTC 2600 Series Section 7 Enhanced Operation SECTION 7: System4 ENHANCED OPERATION NOTE: The following information pertains to System4 multiplexer models only. System4 multiplexers provide special operating modes which enable enhanced operation and special customized system configurations, including expanded systems with control from system keyboards. This section describes the operating features/modes specific to System4 models.
  • Page 36 LTC 2600 Series Section 7 Enhanced Operation Set the Search Time as shown below: SEARCH TIME SETUP 01 This is the time of the picture to be viewed from the VCR tape. 23:06:00 Move Cursor:<> Default:FREEZE Edit:^v Save:SELECT Exit:ZOOM Set the Search Date as shown below: SEARCH DATE This is the date of the Picture to be viewed from...

  • Page 37: System Keyboards

    The LTC 2601/00 and LTC 2602/00 are full function keyboards designed for system control, programming, and Pan/Tilt/Zoom (Philips Allegiant R/D or AutoDome) operation with the System4 Model multiplexers. By using the keyboard port expander LTC 2604 Series unit, purchased separately, up to four keyboards may be connected.
  • Page 38 LTC 2600 Series Section 7 Enhanced Operation Status Display: The status display indicators are located on either side of the numeric display at the top of the keyboard. On the right side of the numeric display, there are three status display indicators: Camera, Cameo, and Pound.

  • Page 39: Appendix A: Features And Specifications

    LTC 2600 Series Appendix A: Features and Specifications Appendix A: FEATURES AND SPECIFICATIONS LTC 2600 Series Model Features FEATURES LTC 2622/90 LTC 2632/90 LTC 2642/90 LTC 2652/90 LTC 2661/90 LTC 2662/90 LTC 2672/90 LTC 2682/90 Camera inputs Color Simplex operation Monochrome...

  • Page 40: Appendix B: Special Applications/System Configurations

    LTC 2600 Series Appendix B: Special Applications/System Configurations Appendix B: SPECIAL APPLICATIONS/SYSTEM CONFIGURATIONS...
  • Page 41 LTC 2600 Series Appendix B: Special Applications/System Configurations...
  • Page 42 LTC 2600 Series Appendix B: Special Applications/System Configurations...
  • Page 43 LTC 2600 Series Appendix B: Special Applications/System Configurations...
  • Page 44 LTC 2600 Series Appendix B: Special Applications/System Configurations...
  • Page 45 LTC 2600 Series Appendix B: Special Applications/System Configurations...
  • Page 46 LTC 2600 Series Appendix B: Special Applications/System Configurations...

  • Page 47: Appendix C: Factory Default Settings

    LTC 2600 Series Appendix C: Factory Default Settings Appendix C: FACTORY DEFAULT SETTINGS ITEM DEFAULT OPTIONS DATE/TIME: Date 01/01/1998 Time 12/00/00 Time Format 24 hr 12 hr, 24 hr Date Format dd/mm/yy (PAL) mm/dd/yy dd/mm/yy yy/mm/dd mm/dd/yy (NTSC) VCR SETUP: Time-lapse 3 hr (PAL) PAL: 3 to 720 hrs or as programmed...
  • Page 48 LTC 2600 Series Appendix C: Factory Default Settings ITEM DEFAULT OPTIONS CAMERA TITLE: Camera Title CAMERA 1 SEQUENCES: Seq Dwell Full A 8 sec 1 - 60 sec Seq Dwell Quad A 8 sec 1 - 60 sec Seq Dwell Full B 8 sec 1 - 60 sec Seq Dwell Quad B...
  • Page 49 LTC 2600 Series Appendix C: Factory Default Settings ITEM DEFAULT OPTIONS CONFIGURE DISPLAY: Time/Date Mon A On, off Time/Date Mon B On, off Show Text Mon A On, off Show Text Mon B On, off Text White:Black Clear:White, Clear:Gray, Clear:Black White:Clear,White:Gray,White:Black Gray:Clear, Gray:White, Gray:Black Black:Clear, Black:White, Black:Gray...

  • Page 50: Appendix D: Programming Reference

    LTC 2600 Series Appendix D: Programming Reference Appendix D: PROGRAMMING REFERENCE Menu Trees: Advanced Setup The following menu trees are provided for reference in locating advanced programming functions. Descriptions of all these functions are located in the ADVANCED SETUP programming section. * System4 only...
  • Page 51 LTC 2600 Series Appendix D: Programming Reference Menu Trees: Advanced Setup (continued) MAIN MENU 3.00 SETUP 1 QUICK SETUP ADVANCED SETUP ADVANCED SETUP SETUP 1 TIME/DATE AUTOSET Choose: SELECT More VCR SETUP ZOOM Exit: ACTION SETUP ALARM SETUP CAMERA TITLES CAMERA TITLES SETUP 1 SEQUENCES...
  • Page 52 LTC 2600 Series Appendix D: Programming Reference Menu Trees: Advanced Setup (continued) * System4 only...
  • Page 53 VEXT INPUT SELECT VCR RECORD FORMAT LTC2600 SELECT VCR *VCR OUT* SETUP 1 RECORD LOCK TIMELAPSE 2 hr - SP TYPE PHILIPS TC3990A RECORD LIST EDIT CUSTOM VCR More Choose: SELECT Exit: ZOOM VCR REMOTE SETUP Choose: SELECT More Exit:...
  • Page 54 LTC 2600 Series Appendix D: Programming Reference Menu Trees: Advanced Setup - ACTION SETUP * System4 only...
  • Page 55 LTC 2600 Series Appendix D: Programming Reference Menu Trees: Advanced Setup - ALARM SETUP ALARM SETUP SETUP 1 ALARM DWELL 05 sec ALARM LIST ALARM LIST ALARM DISPLAY ON MON A SETUP 1 ALARM INPUTS -- -- -- -- -- -- -- -- BEEPER DISABLE -- -- -- -- -- -- -- --...
  • Page 56 LTC 2600 Series Appendix D: Programming Reference Menu Trees: Advanced Setup - CONFIGURE SETUPS...

  • Page 57: Appendix E: Quick Function Keys

    LTC 2600 Series Appendix E: Quick Function Keys Appendix E: QUICK FUNCTION KEYS The LTC 2600 Series Video Multiplexer provides Quick Function Keys which enable “instant access” to the programming lists critical for multiplexer operation. To access the list commands, you will have to press a sequence of keys.

  • Page 58: Appendix F:accessory Cables For The Ltc 2600 Series Multiplexers

    LTC 2600 Series Appendix F: Accessory Cables for the LTC 2600 Series Multiplexers Appendix F: ACCESSORY CABLES FOR THE LTC 2600 SERIES MULTIPLEXERS...
  • Page 59 ® are registered trademarks of Microsoft Corporation. 3935 890 07118 02-36 © 2002 Philips Electronics N.V. Printed In U.S.A. © 2002 Philips Communication, Security & Imaging, Inc. All Rights Reserved. Philips ® is a registered trademark of Philips Electronics N.V.

This manual is also suitable for:

Ltc 2642/90Ltc 2632/90Ltc 2661/90Ltc 2662/90Ltc 2672/90Ltc 2682/90 ... Show all

Table of Contents