Table of Contents
Advertisement
4. Connecting Devices
How does it work?
Pet Tracker
When a user tries to access the Pet Tracker, the Hubble server will authenticate
the user's identity before it grants access to the Pet Tracker.
Important
Make sure that the battery level is more than 70% or the power adapter is
plugged in before starting installation. To check battery level, see "Pet Tracker
Settings" on page 19.
Setup
• Connect the power adapter to a mains power socket and insert the plug into
the micro USB socket on the Pet Tracker.
• Press and hold the POWER KEY
When switched on, the LED lights up in solid green.
Note
You can only setup via a compatible smart device, such as smartphone or
tablet, and not via a PC.
Connecting Devices
Access your Pet
Tracker locally by
2.4Ghz wireless.
Hubble Service
for about 3 seconds to switch it on.
Receive alerts from
your Pet Tracker
from any
compatible
®
TM
Android
or iOS
device remotely.
11
Advertisement
Table of Contents
