Dell PowerConnect J-SRX100SU Getting Started Manual page 16

6 . Click Add and enter the IP address and subnet mask provided
by your ISP.
7 . Click OK.
16
Dell PowerConnect J-Series J-SRX100S/SU Services Gateway Getting Started Guide
2.7.5 Creating a Default Route to the WAN Interface
NOTE: Creating a default route is required only if you
have used a static IP address.
To create a default route to the WAN interface:
1 . Click the Configure tab at the top of the page and navigate
to Routing > Static Routing.
2 . Click Add.
3 . Enter the IP address as 0 .0 .0 .0 and the Subnet mask as
0 .0 .0 .0.
NOTE: While adding the next hop, the field is separated
by tabs instead of dots.