Setting A Boot Password; Setting A Supervisor Password - Samsung NC10 User Manual

Setting a Boot Password

When setting a password, you have to enter a password to use the computer or enter
the BIOS Setup.
Do not lose or forget your password.
If you have forgotten your password, contact a Samsung service center. In this case, a
service fee will be charged.

Setting a Supervisor Password

A Supervisor Password is required to turn
the computer on or to start the System
Setup.
When setting a Supervisor Password,
users other than a supervisor cannot use
the computer.
1
Select the Security menu in the BIOS
Setup.
2
In the Set Supervisor Password
item, press <Enter>.