REAR WHEEL AND BRAKE DISC
EAS00562
REMOVING THE REAR WHEEL
1. Stand the motorcycle on a level surface.
Securely support the motorcycle so that
there is no danger of it falling over.
NOTE:
Place the motorcycle on a suitable stand so that
the rear wheel is elevated.
2. Remove:
S rear gear case fitting bolts
3. Remove:
S brake caliper 1
S brake caliper bracket bolt
NOTE:
Do not depress the brake pedal when removing
the brake caliper.
4. Remove:
S wheel axle nut
S washer
5. Remove:
S rear axle end nut 2
6. Remove:
S rear axle holder 3
7. Remove:
S rear wheel
EAS00566
CHECKING THE REAR WHEEL
1. Check:
S wheel axle
S rear wheel
S wheel bearings
S oil seals
Refer to "FRONT WHEEL AND BRAKE
DISCS".
2. Check:
S tire
Damage/wear ! Replace.
Refer to "CHECKING THE TIRES" in chapter
3.
3. Measure:
S rear wheel radial runout
S rear wheel lateral runout
Refer to "FRONT WHEEL AND BRAKE
DISCS".
–27–
CHAS
WARNING