Polaris Scrambler 1000 Owner's Manual page 59

FEATURES AND CONTROLS
Instrument Cluster
Diagnostic Display Code Definitions
Open Load: There is a break in the wires that lead to the item listed in
the chart (injector, fuel pump, etc.), or the item has failed.
Short-to-Ground: The wire is shorted to ground between the electronic
control unit and the item listed in the chart.
Shorted Load: The wires leading to the item listed in the chart are
shorted together, or the item has shorted internally.
Short-to-Battery: The wire leading from the item listed in the chart to
the electronic control unit is shorted to a wire at battery voltage.
Component
Throttle Position Sensor
Engine Temperature Sensor
Intake Air Temperature Sensor
Manifold Absolute Pressure Sensor
Crankshaft Position Sensor
Vehicle Speed Signal
Gear Sensor Signal
Injector 1 (MAG) (SDI Part Load)
Injector 2 (PTO) (SDI Part Load)
58
Diagnostic Codes
Condition
Voltage Too High
Voltage Too Low
Voltage Too High
Voltage Too Low
Temperature Too High
Engine Overheat Shutdown
Voltage Too High
Voltage Too Low
Voltage Too High
Voltage Too Low
Signal Out of Range
Circuit Fault
Plausibility Fault
Speed Too High
Plausibility Fault
Voltage Too Low
Voltage too high
Signal fault
Driver Circuit Open/Grounded
Driver Circuit Short to B+
Driver Circuit Grounded
Driver Circuit Open/Grounded
Driver Circuit Short to B+
Driver Circuit Grounded
SPN FMI
51 3
51 4
110 3
110 4
110 16
110 0
105 3
105 4
102 3
102 4
102 2
636 8
636 2
84 8
84 2
523 4
523 3
523 2
651 5
651 3
651 4
652 5
652 3
652 4