Configuring Sp+Wrr Queuing - HP 5830 Series Configuration Manual

Acl and qos
Hide thumbs Also See for 5830 Series:
Table of Contents

Advertisement

4.
Configure the scheduling
weight for a queue.
5.
Configure the minimum
guaranteed bandwidth for a
WFQ queue.
6.
Display WFQ queuing
configuration.
For example, configure WFQ queues on an interface, and assign the scheduling weight 1, 5, 10, 20,
and 10 to queue 1, queue 3, queue 4, queue 5, and queue 6, respectively.
# Enter system view.
<Sysname> system-view
# Configure WFQ queues on GigabitEthernet 1/0/1.
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wfq
[Sysname-GigabitEthernet1/0/1] qos wfq 1 byte-count 2
[Sysname-GigabitEthernet1/0/1] qos wfq 3 byte-count 5
[Sysname-GigabitEthernet1/0/1] qos wfq 4 byte-count 10
[Sysname-GigabitEthernet1/0/1] qos wfq 5 byte-count 10
[Sysname-GigabitEthernet1/0/1] qos wfq 6 byte-count 10

Configuring SP+WRR queuing

Step
1.
Enter system view.
2.
Enter interface view.
3.
Enable WRR queuing on the
port.
4.
Assign a queue to the SP
queue scheduling group.
5.
Assign a queue to WRR
group 1, and configure the
scheduling weight for the
queue.
For example:
Configure SP+WRR queuing on GigabitEthernet 1/0/1, and use byte-count WRR.
qos wfq queue-id group
group-id byte-count
schedule-value
qos bandwidth queue queue-id
min bandwidth-value
display qos wfq interface
[ interface-type
interface-number ] [ | { begin |
exclude | include }
regular-expression ]
Command
system-view
interface interface-type
interface-number
qos wrr [ byte-count |
weight ]
qos wrr queue-id group
sp
qos wrr queue-id group
1 byte-count
schedule-value
45
If you have enabled WFQ on the port,
the default scheduling weight is 1 for
each queue.
Optional.
By default, the minimum guaranteed
bandwidth is not configured for a WFQ
queue.
Optional.
Available in any view.
Remarks
N/A
N/A
Optional.
By default, all ports use SP queuing.
The weight keyword is not supported.
By default, all the queues of a WRR-enabled
port use the WRR queue scheduling algorithm.
By default, on a WRR-enabled port, the
weights of queues 0 through 7 are 1, 2, 3, 4,
5, 6, 7, and 8.

Advertisement

Table of Contents
loading

Table of Contents