Page 1
USA, Commercial User default (Home Use)” setting. 1-888-542-2623 CANADA LG Customer Information Center Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR. P/NO : SAC33601902 (0904-REV01) Media Box is not qualified for ENERGY STAR.
Do not attempt to modify this product in any way cable ground shall be connected to the grounding system without written authorization from LG Electronics. of the building, as close to the point of the cable entry Unauthorized modification could void the user’s as practical.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Protect the power cord from being walked on or pinched particularly at plugs, convenience Keep these instructions. receptacles, and the point where they exit from Heed all warnings. the apparatus. Follow all instructions. Do not use this apparatus near water.
Page 4
SAFETY INSTRUCTIONS Never touch this apparatus or antenna during WARNING - To reduce the risk of fire or electrical a thunder or lighting storm. shock, do not expose this apparatus to rain, moisture or other liquids. Do not touch the apparatus with wet hands.
Page 5
A A N N T T E E N N N N A A S S V V e e n n t t i i l l a a t t i i o o n n O O u u t t d d o o o o r r a a n n t t e e n n n n a a g g r r o o u u n n d d i i n n g g Install this apparatus where there is proper...
Modes. Unlike other sensors which can only sense brightness of ambient light, LG’s “Intelligent Sensor” uses 4,096 sensing steps to evaluate its surroundings. Using a A unique invisible speaker system tuned by renowned sophisticated algorithm, the LG processes picture audio expert, Mr.
PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. 1.5V 1.5V Remote Control, Owner’s Manual Power Cord CD Manual Batteries...
PREPARATION FRONT PANEL INFORMATION Image shown may differ from your product. LCD TV CHANNEL ( Buttons VOLUME (+, -) Buttons ENTER SPEAKER ENTER Button MENU MENU Button RF Receiver INPUT (Model: EAX6069R) INPUT Button FCC ID: BEJEAX6069 IC: 2703L-EAX6069 POWER Button Do not block this area.
Page 11
MEDIA BOX POWER touch button Turn the Media Box on or off by touching. Even if you turn the Media Box off, it turns on again automatically if the TV is switched on (when connected with the media box). Wireless Connection Indicator Blinks and then turns on when connecting wirelessly.
PREPARATION BACK PANEL INFORMATION Image shown may differ from your product. LCD TV IN 5 SERVICE ONLY SERVICE ONLY HDMI IN Digital Connection. Supports HD video and Digital audio. Doesn’t support 480i, DVI video and SIMPLINK (HDMI-CEC). USB SERVICE ONLY, SERVICE ONLY Used for software updates.
Page 13
MEDIA BOX VIDEO AUDIO L/MONO AC IN VIDEO AUDIO AUDIO IN ANTENNA/ OPTICAL CABLE IN DIGITAL AUDIO OUT (RGB/DVI) RGB IN (PC) SERVICE ONLY COMPONENT IN HDMI/DVI IN, HDMI IN Analog Connection. Digital Connection. Supports HD. Supports HD video and Digital audio. Doesn’t support 480i.
If you install two or more Media Boxes in the same place, connection may fail. If you want to use two or more Media Boxes, contact your local LG Electronics service center.
INSTALLATION METHOD FOR MEDIA BOX When the Media Box and TV are kept apart and facing each other This is a recommended installation type for good wireless connection. Have the RF Receiver/Transmitter of the Media Box and TV face each other. Keep the distance between them to within 10 m and maintain the face angle of the TV within 100 degrees.
PREPARATION STAND INSTRUCTIONS Image shown may differ from your TV. INSTALLATION ( For 47LH85) Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the TV as shown. Fix the 4 screws securely using the holes in the back of the TV.
Page 17
DETACHMENT Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Remove the screws from the TV. Detach the stand from TV. PROTECTION COVER Insert the P P R R O O T T E E C C T T I I O O N N C C O O V V E E R R into the TV. After removing the protection paper from the protection cover, adhere it to the TV as shown.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer.
CABLE MANAGEMENT Image shown may differ from your TV. Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Install the CABLE MANAGEMENT CLIP as shown. CABLE MANAGEMENT CLIP Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.
PREPARATION DESKTOP PEDESTAL INSTALLATION Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches 4 inches Ensure adequate ventilation by following the clearance recommendations. CAUTION Do not mount near or above any type of heat source.
SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
PREPARATION To prevent damage do not connect to the power outlet until all connections are made between the devices. Image shown may differ from your product. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box VIDEO L/MONO AUDIO...
EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. Image shown may differ from your product. HD RECEIVER SETUP This Media Box can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device.
Page 24
EXTERNAL EQUIPMENT SETUP HDMI Connection 1. How to connect Connect the digital set-top box to H H D D M M I I / / D D V V I I I I N N HDMI OUTPUT 1 1 , 2 2 , 3 3 , or 4 4 jack on the Media Box. No separate audio connection is necessary.
DVI to HDMI Connection 1. How to connect AUDIO Connect the DVI output of the digital set-top box to DVI OUTPUT the H H D D M M I I / / D D V V I I I I N N 1 1 , 2 2 , 3 3 , or 4 4 jack on the Media Box.
EXTERNAL EQUIPMENT SETUP DVD SETUP Component Connection 1. How to connect Connect the video outputs ( Y, P ) of the DVD to the C C O O M M P P O O N N E E N N T T I I N N V V I I D D E E O O 1 1 jacks on the Media Box. Match the jack colors ( Y = green, P = red ) .
Page 27
HDMI Connection 1. How to connect HDMI OUTPUT Connect the HDMI output of the DVD to the H H D D M M I I / / D D V V I I I I N N 1 1 , 2 2 , 3 3 or 4 4 jack on the Media Box. No separate audio connection is necessary.
EXTERNAL EQUIPMENT SETUP VCR SETUP Antenna Connection 1. How to connect Connect the RF antenna out socket of the VCR to the A A N N T T E E N N N N A A / / C C A A B B L L E E I I N N sock- et on the Media Box.
OTHER A/V SOURCE SETUP Camcorder 1. How to connect Video Game Set Connect the A A U U D D I I O O /V V I I D D E E O O jacks between Media Box and external equip- ment.
EXTERNAL EQUIPMENT SETUP USB CONNECTION 1. How to connect COM1 COM2 Connect the USB device to the U U S S B B I I N N jack on the IN 4 USB IN Media Box. 2. How to use After connecting the U U S S B B I I N N jack, you use the USB function.
AUDIO OUT CONNECTION Send the TV’s audio to external audio equipment via the Audio Output port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). 1.
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection RGB OUTPUT AUDIO 1. How to connect Connect the VGA output of the PC to the R R G G B B I I N N ( ( P P C C ) ) jack on the Media Box.
Page 33
NOTES To get the the best picture quality, adjust the PC The synchronization input form for Horizontal and graphics card to 1920x1080. Vertical frequencies is separate. Depending on the graphics card, some resolution Depending on the graphics card, DOS mode may settings may not allow the image to be positioned not work if a HDMI to DVI Cable is in use.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The P P o o s s i i t t i i o o n n , P P h h a a s s e e , and S S i i z z e e can also be adjusted. You can choose this option only when the PC resolution is set to 1024X768, 1280X768 or 1360X768.
Page 35
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. SCREEN Move Prev. PICTURE Move Enter Resolution •...
Page 36
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. SCREEN PICTURE Move Prev.
Page 37
Screen Reset (Reset to original factory values) Returns P P o o s s i i t t i i o o n n , S S i i z z e e , and P P h h a a s s e e to the default factory settings. This feature operates only in RGB-PC mode.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER ON/OFF POWER When the TV and Media Box are connected ENERGY SAVING AV MODE INPUT (Wired/Wireless), the power of both the TV and Media Box will be turned on/off.
NUMBER button — (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. LIST Displays the channel table. p p . . 4 4 9 9 FLASHBK Tunes to the last channel viewed. VOLUME UP Adjusts the volume.
WATCHING TV / CHANNEL CONTROL TURNING ON THE TV m m a a i i n n p p o o w w e e r r s s w w i i t t c c h h to the on position (ON) on the TV First, connect power cord correctly and switch the and Media Box.