Pci Configuration Submenu; I/O Device Configuration Submenu - NEC ShieldPRO N22A User Manual

4.4.2 PCI Configuration Submenu

The PCI Configuration Submenu allows you to set features of PCI devices built in N22A.
Option
On Board LAN
LAN Controller
Option ROM Scan
PCI Express Card
Wireless LAN
Controller
On Board USB
USB Controller
USB 2.0 Controller
Touch Panel
GPS Controller
FingerPrint Sensor
Bluetooth Controller
Card Bus Device
CardBus Controller
IEEE1394 Controller
SD Card Slot
Memory stick Card
*Shaded value: Factory-set

4.4.3 I/O Device Configuration Submenu

The I/O Device Configuration Submenu allows you to set features of peripherals built in N22A.
Option
Serial port A
I/O Base Address
Interrupt
Internal Mouse
Touch Panel
Sound / Modem
Total Graphics Memory
98
Parameter
Provide settings for on-board LAN devices.
If you move the cursor to this option and press Enter, the relevant setting
submenu appears on the screen.
Disabled Enable or disable wired LAN controller.
Enabled
Disabled Enable or disable wireless LAN controller.
Enabled
Provides settings for on-board USB devices.
If you move the cursor to this option and press Enter, the relevant setting
submenu appears on the screen.
Disabled Enable or disable the USB controller.
Enabled Set to [Disabled] to disable even the USB2.0
controller. USB connectors become unavailable (I/O
lock).
Disabled Enable or disable the USB2.0 controller.
Set to [Disabled] to disable the USB2.0 controller.
Enabled
USB devices operate in the USB1.1 specification.
Parameter
Disabled Set to [Disabled] to disable serial port A (I/O lock) and
Enabled release the interrupt.
Set to [Enabled] to enable serial port A.
3F8 Specify the I/O base address of serial port A.
2F8
3E8
2E8
IRQ 4 Specify the IRQ of serial port A.
IRQ 3
Disabled Set to [Disabled] to disable the touch pad.
Enabled Set to [Enabled] to enable the touch pad.
Disabled Set to [Disabled] to disable the touch panel.
Enabled Set to [Enabled] to enable the touch panel.
Disabled Set to [Disabled] to disable sound (makes the audio
Enabled controller disabled).
Set to [Enabled] to enable sound.
Specify the graphic memory capacity.
Description
Description