Spark Plug; Needle Bearing Lubrication; Adjustment Of The Oil Pump - Husqvarna 565 Operator's Manual

Hide thumbs Also See for 565:
Table of Contents

Advertisement

against the filter holder. Clean the filter by brushing or
shaking it.
The filter can be cleaned more thoroughly by washing it in
water and detergent.
An air filter that has been in use for a long time cannot be
cleaned completely. The filter must therefore be replaced
with a new one at regular intervals. A damaged air filter
must always be replaced.
A HUSQVARNA chainsaw can be equipped with different
types of air filter according to working conditions, weather,
season, etc. Contact your servicing dealer for advice.

Spark plug

The spark plug condition is influenced by:
An incorrect fuel mixture (too much or incorrect type
of oil).
A dirty air filter.
These factors cause deposits on the spark plug
electrodes, which may result in operating problems and
starting difficulties.
If the machine is low on power, difficult to start or runs
poorly at idle speed: always check the spark plug first
before taking any further action. If the spark plug is dirty,
clean it and check that the electrode gap is 0,5 mm. The
spark plug should be replaced after about a month in
operation or earlier if necessary.
Note! Always use the recommended spark plug type! Use
of the wrong spark plug can damage the piston/cylinder.
For recommended spark plug, see Technical data.
MAINTENANCE

Needle bearing lubrication

The clutch drum has a needle bearing on the output shaft.
This needle bearing must be lubricated regularly (once a
week).
Check that the chain brake is in disengaged position
by moving the front hand guard towards the front
handle.
When lubricating, remove the clutch cover by loosening
the two bar nuts. Lay the saw on its side with the clutch
drum upwards.
Remove the clutch drum and lubricate the needle bearing
using a grease gun.

Adjustment of the oil pump

The oil pump is adjustable. Adjustments are made by
turning the screw using a screwdriver or combination
spanner. The machine is supplied from the factory with
English
35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

572xp572xpg

Table of Contents