Enabling Wlans (Cli) - Cisco Catalyst 3650 Series Configuration Manual

Configuring WLANs
• VLAN
• Status
If a WLAN exists, it would appear based on the accuracy of the match.

Enabling WLANs (CLI)

SUMMARY STEPS
1. configure terminal
2. wlan profile-name
3. no shutdown
4. end
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Switch# configure terminal
Step 2 wlan profile-name
Example:
Switch# wlan test4
Step 3
no shutdown
Example:
Switch(config-wlan)# no shutdown
Step 4
end
Example:
Switch(config)# end
Related Topics
Prerequisites for WLANs, on page 21
Restrictions for WLANs, on page 22
OL-32353-01
Purpose
Enters global configuration mode.
Enters the WLAN configuration submode. The profile-name
is the profile name of the configured WLAN.
Enables the WLAN.
Returns to privileged EXEC mode. Alternatively, you can also
press Ctrl-Z to exit global configuration mode.
WLAN Configuration Guide, Cisco IOS XE Release 3E (Catalyst 3650 Switches)
Enabling WLANs (CLI)
31