Omega CN32Pt User Manual page 9

3 Parameter Name List
The following table summarizes all parameter names supported by the LOAD and SAVE file
commands.
The data TYPE column key is:
L – long (32 bit) integer
R – short (16 bit) integer
F – floating point value
Mnemonic
DEVICE_ID
VERSION_NUMBER
INPUT_SENSOR
TC_TYPE
RTD_WIRE
RTD_ACRV_OHM_TYPE
THERMISTOR_VALUE
PROCESS_RANGE
INPUT_SENSOR
TC_TYPE
RTD_WIRE
DB_4_20_MANUAL_LIVE
DB_4_20_MANUAL_READING_1
DB_4_20_MANUAL_INPUT_1
DB_4_20_MANUAL_READING_2
DB_4_20_MANUAL_INPUT_2
DB_4_20_LIVE_READING_1
DB_4_20_LIVE_INPUT_1
DB_4_20_LIVE_READING_2
DB_4_20_LIVE_INPUT_2
DB_0_24_MANUAL_LIVE
DB_0_24_MANUAL_READING_1
DB_0_24_MANUAL_INPUT_1
DB_0_24_MANUAL_READING_2
DB_0_24_MANUAL_INPUT_2
DB_0_24_LIVE_READING_1
Platinum Load & Save File Format
Revision 0.1
Description
Type
L Device Identifier
L Device Version (xxx.xxx.xxx.xxx)
R Enumerated sensor (input) type
R Enumerated Thermocouple type
R Enumerated RTD wire type
R Enumerated RTD Curve
R Enumerated Thermistor type
R Enumerated process input range
R Enumerated sensor (input) type
R Enumerated Thermocouple type
R Enumerated RTD wire type
R Enumerated Input Process mode
F Manual Scale reading value 1
F Manual Scale input value 1
F Manual Scale reading value 2
F Manual Scale input value 2
F Live Scale reading value 1
F Live Scale input value 1
F Live Scale reading value 2
F Live Scale input value 2
R
F
F
F
F
F
Page 7 of 15