Air Cleaner Removal/Installation - Honda GX240RT2 Service And Repair Manual

AIR CLEANER REMOVAL/
INSTALLATION
Dual Element type:
BREATHER TUBE
INSTALLATION:
After installing the air cleaner elbow,
insert the breather tube to the hole
of the cylinder head cover as shown.
BREATHER TUBE
HIGH TENSION CORD
ANGLED CUT END
CARBURETOR SPACER
INSTALLATION:
Before installing, check for damage.
Note the installation direction.
Viewed from air cleaner side
gx240ut2_gx270ut2_gx340ut2_gx390ut2
SERVICE BULLETIN #46 =>
WING NUT
AIR CLEANER
ELEMENT (PAPER)
WASHER BOLT
(6 x 22 mm)
COLLAR
NUT
AIR CLEANER
COVER
AIR CLEANER ELBOW
REMOVAL/
INSTALLATION:
Remove and install the air
cleaner elbow with the
fuel valve lever in the OFF
position and the choke
lever in the CLOSE
position.
Before installation, clean
the inside of the air
cleaner elbow.
AIR CLEANER
COLLAR (2)
NUT (6 mm) (2)
9 N·m (0.9 kgf·m, 7 lbf·ft)
FUEL SYSTEM
GROMMET
AIR CLEANER
ELEMENT (FOAM)
NOISE SILENCER
AIR CLEANER
ELBOW SEAL