Related Manuals for LG 22BK55WV
Summary of Contents for LG 22BK55WV
- Page 1 OWNER’S MANUAL IPS LED MONITOR (LED LCD MONITOR) Please read this manual carefully before operating your set and retain it for future reference. IPS LED(LED LCD) MONITOR MODEL 22BK55WV 24BK55WV www.lg.com...
-
Page 2: Table Of Contents
- Menu Settings TROUBLESHOOTING Unpacking Parts and buttons Setting up the Monitor set SPECIFICATIONS - Attaching the Stand Base 22BK55WV - Detaching the stand base 24BK55WV - Detaching the stand body Preset Modes (Resolution) - Using the cable holder Indicator... -
Page 3: License
LICENSE Each model has different licenses. Visit www.lg.com for more information on the license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. -
Page 4: Assembling And Preparing
ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. D-SUB Cable DVI-D Cable CD(Owner's Manual) /... -
Page 5: Parts And Buttons
Parts and buttons Power Indicator LED On : Power is on LED Off: Power is off (Power Button) Front Side Buttons... -
Page 6: Setting Up The Monitor Set
Detaching the stand base Setting up the Monitor set Attaching the Stand Base Place the monitor's screen face down. To protect the screen from scratches, cover the surface with a soft cloth. Place the Monitor set with the screen side down on a flat and cushioned surface. -
Page 7: Detaching The Stand Body
Detaching the stand body NOTE Place the monitor's screen face down. To The holes are used for wall mount bracket. Varies depending upon your country or protect the screen from scratches, cover the model. surface with a soft cloth. Using a screwdriver, remove the four screws and detach the stand from the monitor. -
Page 8: Adjusting The Angle
Connect the Power cord to the monitor, then WARNING plug the power cord into the wall outlet. (Before connect please check the “ON/OFF” To avoid injury to the fingers when adjusting knob in “O” state). the screen, do not hold the lower part of the Press the “ON/OFF”... -
Page 9: Adjusting The Stand Height
Adjusting the stand height CAUTION Once the pin is removed, it is not necessary Place the monitor mounted on the stand base to re-insert it to adjust the height. in an upright position. Remove the tape attached at the bottom rear of the stand body, then pull out the locking WARNING pin. -
Page 10: Swivel Stand
Swivel stand Be careful with the cables when rotating the screen. Image shown may differ from your Monitor set. Swivel 355 degrees and adjust the angle of the Monitor set to suit your view. Using the Pivot function The pivot function allows you to rotate the screen 90 degrees clockwise. -
Page 11: Mounting On A Wall
If you use improper screw, the product might be damaged and drop from mounted position. In Wall mount Pad this case, LG Electronics is not responsible for Back Cover Standard screw VESA compatible only with respect to screw mounting interface dimensions and mounting Max.8mm... -
Page 12: Using The Monitor Set
USING THE MONITOR SET Connecting to a PC DVI-D connection Transmits a digital video signal from your PC to Your Monitor set supports Plug & Play*. the Monitor set. Connect the PC and the Monitor *Plug & Play: A PC recognizes a connected set with a DVI cable as shown in the following device that users connect to a PC and turn illustrations. -
Page 13: Hdmi Connection
HDMI connection NOTE When you want to use two PC in our Monitor, Transmits the digital video and audio signals from your please connect the signal cable(D-SUB/ PC and A/V devices to the monitor. Connect your PC DVI-D/HDMI) respectively in Monitor set. and AV device to the monitor with the HDMI cable as If you turn the Monitor set on while it is cold, illustrated below. -
Page 14: Peripheral Device Connection
Self Image Setting Function Peripheral device connection Press the power button on the bottom panel to Connect peripheral devices to the monitor. turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed Two USB Downstream ports automatically. -
Page 15: Customizing Settings
When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) The best display mode 22BK55WV: 1680 x 1050 24BK55WV: 1920 x 1200 You can choose the input signal. • When two input signals are connected, you can select the input signal (D-SUB/DVI-D/ HDMI) you want. -
Page 16: Customizing Settings
Customizing Settings Menu Settings Menu Analog Digital HDMI Description Volume ● ● ● To adjust the volume Brightness ● ● ● To adjust the brightness of the screen Response Time You can set a response time for displayed pictures based (only for 24K55WV) on the speed of the screen. - Page 17 Menu > Next Menu > Picture Description Contrast To adjust the contrast of the screen. Sharpness To adjust the clearness of the screen. Black Level Sets the offset level (for HDMI only). y Offset: as a reference for a video signal, this is the darkest color the monitor can display.
- Page 18 Reader Mode Description Reader 1 It is a mode that the screen is adjusted to the best for the newspaper. If you want screen more bright, you can control brightness in Menu OSD. Reader 2 It is a mode that the screen is adjusted to the best for the cartoon. If you want screen more bright, you can control brightness in Menu OSD.
-
Page 19: Troubleshooting
TROUBLESHOOTING Check the following before calling for service. No image appears y Check and see if the power cord is connected properly to the power Is the power cord of the display connected? outlet. y Press the Power button. Is the power indicator light on? y Adjust the brightness and the contrast. - Page 20 Be sure to install the display driver from the display driver CD (or driver? diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. y Make sure to check if the video card supports Plug&Play function.
-
Page 21: Specifications
SPECIFICATIONS 22BK55WV Display Screen Type Flat Panel Active matrix-TFT LCDAnti-Glare coating Pixel Pitch 0.282 mm x 0.282 mm Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56 Hz to 75 Hz Input Form Separate Sync. Digital... -
Page 22: 24Bk55Wv
SPECIFICATIONS 24BK55WV Display Screen Type Flat Panel Active matrix-TFT LCDAnti-Glare coating Pixel Pitch 0.27 mm x 0.27 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56 Hz to 60 Hz Input Form Separate Sync. Digital Video Input Signal Input 15 pin D-SUB Connector /DVI-D Connector (Digital)/... -
Page 23: Preset Modes (Resolution)
Preset Modes (Resolution) D-SUB/DVI Timing 22BK55WV Horizontal Vertical Display Modes (Resolution) Polarity(H/V) Frequency(kHz) Frequency(Hz) 720 X 400 31.468 70.08 640 x 480 31.469 59.94 640 x 480 37.5 800 x 600 37.879 60.317 800 x 600 46.875 1024 x 768 48.363... -
Page 24: Indicator
HDMI Timing (Video) Factory support mode Vertical Horizontal Frequency(kHz) Remarks (Preset Mode) Frequency(Hz) 480p 31.5 576P 31.25 720p 37.5 720p 45.0 1080p 56.25 only for 24BK55WV 1080p 67.5 only for 24BK55WV Indicator Mode LED Color On Mode White Sleep Mode Blinking White Off Mode... - Page 25 Declaration of Conformity Trade Name: LG Model : 22BK55WV,24BK55WV Responsible Party: LG Electronics Inc. Address : 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534 *above information is only for USA FCC Regulatory Make sure to read the Safety Precautions before using the product.