Initial Setup - Sharp MX-C310 Handy Manual

INITIAL SETUP

Adjustments highlighted in
consumables:-
DEVELOPER SET-UP
Install CMYK Developer - Auto Developer Adjustment (Sim 25-02) should
execute automatically.
Toner Installation must be performed after Auto Developer Adjustment is
completed.
Clean LSU Dust Proof Glass.
TONER INSTALLATION & REPLENISHMENT
Install CMYK Toner Cartridges.
PRODUCT ACTIVATION & FIRMWARE UPGRADE
Activation of Optional Product(s):-
Sim 22-05
INITIAL SETUP
Sim 26-06
Sim 26-35
Sim 26-52
Sim 55-03
Sim 55-03
System Settings: Adjust Date/Time (Inc. Daylight Saving setting).
Keyboard Language Setting (For Embedded Keyboard):-
System Settings – Default Settings – Keyboard Select: Set English(US)
Set cassette size by adjusting the guides in the cassette.
Paper Size & Type
Set Active USB Port (MFP PWB DIP):-
PRINT IMAGE POSITION & MAGNIFICATION
Automatic Adjustment:-
Sim 50-28
8
PURPLE are automatic when using Advanced SRU
Check Firmware version(s):-
Machine Destination.
Set Multi Error Counter:-
Non Printed Paper Counter Set-up.
Process Mixed Size Pages (orientation) when Printing in Duplex:-
SSW 3-6, 0 = Disable, 1 = Enable.
Toner Remain Status Display: SSW 22-5,
Setting:- System Settings – Paper Tray Settings.
BK MAG ADJ (Main Scan Mag).
SETUP/PRINT ADJ (Lead, Offset or All).
System Settings – Product Key.
Upgrade to latest version.
Set to 1 (Multi Count).
0 = Disable, 1 = Enable.
SW2 OFF (Front - Default), ON (Rear).
SHARP