Core Menu; Contrast Field; Tsid Field; Video Out Format Menu - Motorola DSR-6050 Operator's Manual

Core Menu

Press the 56 buttons until the Core menu appears. This menu allows the user to
change the front panel LCD contrast.

Contrast Field

To adjust the LCD contrast, press the4button until the cursor is at the Contrast
label, and press the ENTER button to move into the field. Use the arrow buttons
(3456) to select a value between 1 and 30, with 1 representing the least
contrast and 30 the most. Adjust the contrast so that the LCD panel can be read
clearly. Press the ENTER button to confirm the selection. The default is 18.

TSID Field

TSID field is not editable. It displays the current transport stream ID of the satellite
signal.

Video Out Format Menu

Press the 56 buttons until the Video Out Format menu appears. It has two fields
that allow modification of the output format. The transcoder does not convert
525-line video to 625-line video or convert 625-line video to 525-line video. When
the input to the uplink encoder is 525-line, the field here selects the transcoder
output to be NTSC or PAL M, and the 625-line field has no impact. When the input
to the uplink encoder is a 625-line, the field selects the type of PAL the transcoder
outputs, and the NTSC or PAL M selection has no impact.

525 Lines Field

Press the4button until the cursor is at the 525 Lines label, and press the ENTER
button to move into the field. This field allows selection of the output format for
525-line video as either NTSC or PAL M. The default setting is NTSC. Use the
arrow buttons (3456) to specify the desired option and press the ENTER
button to confirm the selection.
DSR-6050
Operating the DSR-6050
23