Packet Data - Nokia 6136 User Manual

Hide thumbs Also See for 6136:
Table of Contents

Advertisement

6136.ENv1_Orange_4july06.fm Page 42 Tuesday, July 4, 2006 12:39 PM
S e t t i n g s
To activate the IR port of your phone, select
Infrared.
To deactivate the IR connection, select
Infrared. When the phone displays
If data transfer is not started within two minutes after the activation of the IR
port, the connection is canceled and must be started again.
IR connection indicator
When
is shown continuously, the IR connection is activated, and your
phone is ready to send or receive data through its IR port.
When
blinks, your phone is trying to connect to the other device, or a
connection has been lost.

Packet data

General packet radio service (GPRS) is a network service that allows mobile
phones to send and receive data over an Internet protocol (IP) based network.
GPRS is a data bearer that enables wireless access to data networks such as the
Internet.
Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For
more information on availability of EGPRS or GPRS and data transfer speed,
contact your network operator or service provider.
The applications that may use EGPRS or GPRS are MMS, video streaming,
browsing sessions, e-mail, remote SyncML, Java application downloading, and
the PC dial-up.
When you have selected GPRS as a data bearer, the phone uses EGPRS instead of
GPRS, if this is available in the network. You cannot select between EGPRS and
GPRS, but for some applications you may be able to select GPRS or
(circuit switched data, CSD).
To define how to use the service, select
Packet data
>
Packet data connection
When needed
— to set the packet data registration and connection to
established when an application using packet data needs it and closed when you
end the application.
Always online
— to set the phone to automatically register to an packet data
network when you switch the phone on.
EGPRS service is available.
42
Menu
>
Settings
>
Connectivity
Menu
>
Settings
>
Connectivity
Deactivate
infrared?, select Yes.
Menu
>
Settings
>
Connectivity
and one of the following options:
or
indicates that the GPRS or
>
>
GSM data
>

Advertisement

Table of Contents
loading

Table of Contents