Installation; Connect The Transmitter To Your Hd Devices; Connect The Receiver To The Hdtv Set - Philips SWW1810 User Manual

4 Installation

Connect the transmitter to
your HD devices
You can connect two audio/video sources to
the transmitter at the same time, but only one
source can be selected and played.
1
Connect the audio/video source to the
transmitter using the supplied HDMI cable.
‡ Connect one end of the HDMI cable
to the HDMI IN connector of the
transmitter.
Note
‡
There are two HDMI IN adapters but only one HDMI
cable is supplied. To connect to two audio/video
sources to the transmitter at the same time, you need
an additional HDMI cable.
‡ Connect the other end of the HDMI
cable to the HDMI OUT connector of
the video source.
2
Connect the supplied power adapter to
the transmitter.
‡ Connect one end of the power
adapter to the DC IN jack of the
transmitter. Connect the other end of
the power adapter to a power socket.
‡ The power button of the transmitter
is lit in solid blue and turns red in
standby mode.
Connect the receiver to the
HDTV set
HDMI OUT
IR IN
DC 5V
2
1
HDMI IN
1
Connect the receiver with an additional
+'0, FDEOH QRW VXSSOLHG
‡ Connect one end of the HDMI cable
to the receiver.
‡ Connect the other end to the HDMI
IN connector of your HDTV.
2
Connect the supplied power adapter to
the receiver:
‡ Connect one end of the power
adapter to the DC IN jack of the
receiver.
‡ Connect the other end of the power
adapter to a power socket.
‡ The power button of the receiver is lit
in solid blue and turns red in standby
mode.
EN 9