Use The Preprogrammed Zone Switch; Select A Channel; Method 1: Use The Preprogrammed Channel Selector - Motorola ASTRO XTS 2500 III User Manual

General Radio Operation

Use the Preprogrammed Zone Switch

1 If a control on your radio has
been preprogrammed as the
Zone Switch, move the
Zone Switch to the position
for the zone you want.
Note: If the zone you selected
is unprogrammed, repeat
step 1.
2 Press h to confirm the
displayed zone and channel.

Select a Channel

Consult an authorized service technician for the right choice between
the following methods.

Method 1: Use the Preprogrammed Channel Selector

After the zone you want is
displayed, turn the
preprogrammed Channel
Selector switch to the desired
channel.
34
),5(
81352*5$00('
',631: