TSX-130/TSX-120
■ DISASSEMBLY PROCEDURES / 分解手順
Disassembly procedure of TSX-130 is described to
represent similar models.
● How to manually eject the disc tray
a. Using an Allen hex socket screwdriver (2.5 mm),
move the slider in the direction indicated in the
figure below until the disc tray comes out. (Fig. 1)
b. Gently pull the disc tray comes out.
14
Lid / リッ ド
An Allen hex socket screwdriver
6角穴ネジ用ドライバー
Fig. 1
代表で、TSX-130 の分解手順を記載します。
● 手動でディスクトレイを開く方法
a. 6 角穴ネジ用ドライバー(2.5 mm)で、 スライダー
を図に示す矢印の方向に、ディスクトレイが出て
くるまで、動かします。 (Fig. 1)
b. ディスクトレイをそっと引き出します。
Disc tray
ディスク トレイ