Dell Latitude 7380 Owner's Manual page 23

c Remove the M2.0 x 2.5 screw that secures the LED board to the computer [3]
d Lift the LED board from the computer [4].
Installing LED board
1 Insert the LED board into the slot on the computer.
2 Tighten the M2.0 x 2.5screw to secure the LED board.
3 Route the LED cable through the routing channel.
4 Connect the LED cable to the LED board.
5 Install the base cover.
6 Follow the procedure in
Smart card module
Removing smart card cage
1 Follow the procedure in
2 Remove the:
a base cover
b battery
c PCIe SSD card
3 To disconnect the smart card cable:
a Disconnect the smart card cable [1].
After working inside your computer.
Before working inside your computer.
Removing and installing components 23