Belt Clip; Installing The Belt Clip - Motorola ASTRO XTS 3000 Service Manual

Belt Clip

8.3 Belt Clip
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
This section describes how to install and remove the belt clip.

8.3.1 Installing the Belt Clip

Use the following procedure to install the belt clip.
Procedure 8-3
1
2
3
8-4
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
The battery must be removed from the radio before the belt clip can be installed or removed.
Belt Clip Attachment
Hold the battery in one hand so that the top of the battery faces upward, and the
back of the battery faces you.
Holding the belt clip in the other hand with its top facing upward, align the slide
assembly on the front of the belt clip with the slots on the back of the battery.
Slide the belt clip downward toward the bottom of the battery until the belt clip
"clicks" in place.
Slide
Assembly
Belt Clip
Slots
Battery
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Chapter 8: Basic Removal/Installation Procedures
■ ■ ■ ■
■
■
68P81083C85-A March 2004