Table of Contents
Advertisement
3. Basic Setup
3.1
Charge the Pet Camera
1. Connect the power adapter to an electrical outlet and insert the plug into
the micro USB socket on the Pet Camera. Only use the supplied power
adapter (5V DC / 1000mA) with the Micro USB plug.
2. The status indicator LED lights up solid red, which indicates that it is
charging.
NOTE
Only use the enclosed power adapter (5V DC / 1000mA). The battery pack will
take approximately 6 hours to charge. The average battery life is up to 2 weeks,
depending on how often you use it. The status indicator LED blinks in red when
battery is low. To conserve battery life, press and hold the POWER KEY to
switch off the Pet Camera when it is not in use.
3.2
Attach the Adjustable Strap to the Pet Camera
1. Set the Pet Camera facing down.
2. With the front side of the buckle facing down, thread the strap through
the first slot, moving it towards the second slot.
Slot
3. Continue to thread through the second slot.
8
Slot
Basic Setup
3.3
Fit the Pet Camera on your Dog's
Neck
1. Have your dog stand in a balanced position on a flat,
even surface.
2. Put the strap over your dog's neck, centering the
Pet Camera underneath its neck and making sure
that the Motorola logo is upright facing you.
3. String the end of the strap through the strap buckle.
4. Pull the end of the strap until the desired level of
tightness is reached and push the retainer bar
through the nearest strap hole, then insert the strap
through the remaining strap buckle to secure it.
5. Check to ensure that the Pet Camera is in the
center underneath the neck of your dog.
6. Check the fit again after your dog has worn the Pet Camera for several
minutes or as your dog gets more comfortable with it.
NOTE The Pet Camera should fit snugly on your dog's neck such that you can
only fit two fingers underneath it. It should not be able to rotate around the
neck.
Basic Setup
9
Advertisement
Table of Contents
