Connecting The Swa-W700 To A Soundbar; Check The Standby Status After Plugging Into An Electrical Outlet - Samsung SWA-W700 User Manual

Open Source License Notice
• To send inquiries and requests for questions regarding open sources, contact Samsung via Email
(oss.request@samsung.com).
• This product uses some software programs which are distributed under the FreeRTOS Modified GPL.
GPL Software : FreeRTOS
FreeRTOS Modified GPL License
http://www.freertos.org/license.txt
Connecting the SWA-W700 to a Sound bar
1. Check the standby status after plugging into an electrical outlet
Plug the Wireless Subwoofer power cord into an electrical outlet and into the Wireless Subwoofer
to turn on the Wireless Subwoofer. The LINK LED indicator (blue LED) on the Wireless Subwoofer
blinks. If the LED does not blink, refer to step 7 on page 10.
Blue blinking
Bottom of the Wireless Subwoofer Front of the Wireless Subwoofer
• The main unit is heavy. Be careful not to pinch your fingers when pressing the
ID
SET button or
connecting the power cord to the bottom of the unit.
• The upper part of the subwoofer is prone to scratches. Handle it carefully.
Speaker Unit
Rear of the Wireless Subwoofer
• Do not press on or strike the Speaker Unit on the
rear of the body. You can deform or damage the
speaker.
ENG-7