Dvd 5.1 Ch/7.1Ch (5.1 Ch For Vsx-D710S) Input Playback; Midnight Listening Mode; Playing Other Source - Pioneer VSX-D710S Operating Instructions Manual

DVD 5.1 ch./7.1 ch (5.1 ch for VSX-
D710S) input playback
If you want you can connect a component with 7.1
channel (5.1 channel for VSX-D710S) analog output to
enjoy surround sound playback. In this case the
surround sound will be externally decoded and then fed
into the receiver.
SOURCE
DVD/LD
MULTICONTROL
DVD
RCV
RCV
1
MIDNIGHT
5.1/7.1
4
7
10
DTV INFO MPX/RETURN
¶
BAND CLASS
1 ¡
2
To switch on DVD 7.1 ch (5.1 ch for VSX-
D710S) mode press the
button on the remote, then
CONTROL
then button.
5.1/7.1
VSX-D710S only: On the main unit press the
button to switch on 5.1 ch mode.
DVD 5.1CH
Press the button on the remote to go
5.1/7.1
back to the DVD/LD mode. If you're using
the main unit, choose any other function
with the
MULTI JOG
MEMO:
• When 5.1 ch/7.1 ch input is selected, Dolby mode,
DSP mode, SIGNAL SELECT, ATT, DIRECT, TONE,
MIDNIGHT mode, LOUDNESS and speakers B
cannot be operated.
• When 5.1 ch/7.1 ch input is selected, only the
volume level and channel levels can be set.

MIDNIGHT Listening Mode

When listening at low volume, surround effects tend to
become less than satisfactory. Turn the MIDNIGHT
listening mode on to enjoy the effects of quality
surround sound even at low volumes. This mode allows
you to hear effective surround sound of movies at low
volume levels.
SOURCE
1
DVD
RCV
1
MIDNIGHT
2
4
7
10
DTV INFO MPX/RETURN
¶
BAND
1
RECEIVER
TV VCR CD-R
MULTI CONTROL
TUN
CD TVC
2 3
5.1 / 7.1 ATT
5 6
EFFECT
8 9
DISC
0
ENTER
D.ACCESS GUIDE
3
8
7
DTV ON/OFF DTV MENU
4 ¢
DVD/LD MULTI
RCV
.
RECEIVER
TV VCR CD-R
MULTI CONTROL
CD TUN TVC
2 3
ATT
5.1 / 7.1
5 6
EFFECT
8 9
DISC
0
ENTER
D.ACCESS GUIDE
3
7 8
CLASS DTV ON/OFF DTV MENU
¡ 4 ¢
1 Press .
RCV
This sets the remote to select the sound mode.
(You can skip this step when using the controls on
the receiver.)
2 Press MIDNIGHT.
Each press switches MIDNIGHT listening mode on or
off.
MEMO:
• The effect automatically adjusts according to the
volume level.
Playing other Sources
,
DTV INFO
1 Turn on the power of the playback
component.
2 Turn on the power of the receiver.
Be sure that the standby indicator turns off on the
front panel.
3 Press
MULTI CONTROL
button to select the source you
FUNCTION
want to playback.
If the DIRECT FUNCTION is OFF you have to use
the FUNCTION button to select the source (see
p.39).
4 If necessary, press
the input signal corresponding to the source
component (see p.29).
5 Start playback of the component you
selected in step 1.
Sound Modes
2
SOURCE RECEIVER
DVD TV VCR CD-R
3
MULTI CONTROL
RCV CD TUN TVC
1 2 3
MIDNIGHT 5.1 / 7.1 ATT
5 6
4
EFFECT
7 8 9
10 DISC
0
ENTER
MPX/RETURN D.ACCESS GUIDE
3
¶
7 8
BAND CLASS DTV ON/OFF DTV MENU
1 ¡ 4 ¢
4
2
/DTS DSP TEST TONE SIGNAL SELECT
CH SELECT CH LEVEL FUNCTION
buttons or the
SIGNAL SELECT
to select
31
En