Using The Setup Wizard - D-Link DFL-200 Quick Installation Manual

Network security

Hide thumbs Also See for DFL-200:

When you have completed the steps in this Quick Installation

Guide, your connected network should look similar to this:

Using The Setup Wizard

The DFL-200 provides Web based configuration. You can configure

your DFL-200 through your Netscape Communicator or Internet

Explorer browser in MS Windows, Macintosh or UNIX based

platforms.

Activate your browser. Then type the IP address of the DFL-200

into the Location (for Netscape) or Address (for IE) field and press

"Enter." For example: http://192.168.1.1.

Open your Web browser and

type

"http://192.168.1.1"

URL address box. Then press the

Enter or Return key.

(The IP Address shown in the example above is the default setting.

If you have changed the IP Address of the DFL-200 to conform to a

network, then input that IP Address in the web browser, instead of

the default IP Address shown.)

into the

Table of Contents