Assembling The Ap And Connecting The Antenna - Motorola PMP 320 Hardware Installation

PMP 320 Hardware Installation

Assembling the AP and connecting the antenna

Use the following procedure to assemble the pipe clamp brackets to the AP, and attach the radio
to the antenna. These steps are performed before the AP is mounted on the pole.
Required Tools
•
Two ½ inch wrenches
•
9/16 inch wrench and inclinometer
•
10mm socket wrench
Torque Requirements
•
3/8 -16 pipe clamp hardware to 9 ft-lbs (12.2 N.m)
•
5/16-18 mount hardware 10 ft-lbs (13.5 N.m)
•
M6 hardware 7 ft-lbs (9.5 N.m)
Procedure 2-1
PMP320HDW2v1
Assemble the AP and antenna for pole mounting
Preliminary
Assembling the AP and connecting the antenna
Continued
2-5
JUL 2010