Hdmi Troubleshooting - Pioneer ELITE DV-49AV Operating Instructions Manual

HDMI troubleshooting

09
Problem
No HDMI audio output.
No HDMI video output.
No multichannel HDMI
audio.
No sound is output from the
AUDIO OUT (5.1ch) jack
when connected via HDMI.
Component Out cannot be
set to Interlace.
58
En
Remedy
• Check whether or not HDMI Out is set to Off (page 40).
• This unit has been designed to be compliant with HDMI
(High-Definition Multimedia Interface). Depending on the
component you have connected, unreliable signal transfers may
result.
• If the front panel HDMI indicator is lit:
– You won't hear any sound from the HDMI output if the source
component is only DVI/HDCP-compatible.
• If the front panel HDMI indicator is unlit then:
– Make sure that you've selected this player as the HDMI input in
the settings for the component you're using. You may need to refer
to the instruction manual of the component to do this.
– Check that the HDMI cable is connected properly and that the
cable isn't damaged.
– Check that components connected using the HDMI interface are
switched on and HDMI compatible.
• Make sure that you've selected this player as the HDMI input in
the settings for the component you're using. You may need to refer
to the instruction manual of the component to do this.
• Check that the HDMI cable is connected properly and that the
cable isn't damaged.
• Check that components connected using the HDMI interface are
switched on and HDMI compatible.
• This unit has been designed to be compliant with HDMI
(High-Definition Multimedia Interface). Depending on the
component you have connected, using a DVI connection may result
in unreliable signal transfers.
• Make sure the resolution on this player matches that of the
component you have connected using HDMI. See HDMI
Resolution on page 41 to change the HDMI resolution. See
Resetting the output resolution to the default setting with HDMI
connection on page 16 if you want to reset the output resolution.
• Make sure the HDMI Out setting is set to Auto, Auto (DSD) or
LPCM (5.1CH) (page 40). See also About the HDMI audio output
settings on page 48 and HDMI output with DVD-Audio and SACD
sources on page 49.
• Check whether or not HDMI Out is set to Off. (See HDMI Out on
page 40.)
• You can use the Interlace setting if the HDMI Resolution is set to
720x480i (page 41).