Photoviewer; Dts Downmix; Speakers; Audio Output Mode - Pioneer DV-563A Operating Instructions Manual

09 Initial Settings menu

PhotoViewer

• Default setting: On
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options

Speakers

This setting is important if you load a disc that
contains both MP3 audio files and JPEG
picture files.
The default On setting allows you to view only
the JPEG files on this kind of disc. Set to Off
to be able to play the MP3 audio files.
• Changing the PhotoViewer setting does
not take effect until the next disc is loaded
(or the current disc is reloaded).

DTS DownMix

• Default setting: STEREO
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
If you've selected DTS > PCM in DTS Out on
page 55 or 2 Channel in Audio Output Mode
on page 66, you can choose the way the
signal is downmixed to PCM audio. STEREO
will downmix the DTS signal to 2-channel
stereo, whereas Lt/Rt will downmix to a 2-
channel signal compatible with Dolby
surround matrix decoders.
66
En
Parental Lock On
Bonus Group Off
Auto Disc Menu
Group Playback
DVD Playback Mode
SACD Playback
PhotoViewer
DTS DownMix STEREO
Lt/Rt
Speakers

Audio Output Mode

• Set in Setup Navigator (Default: 2
Channel)
Initial Settings
Digital Audio Out Audio Output Mode
Video Output Speaker Installation
Language Speaker Distance
Display Channel Level
Options
Speakers
If you connected this player to your amplifier
using the 5.1 channel analog outputs (front,
surround, center and subwoofer outs), set
this to 5.1 Channel; if you connected only the
stereo outs, set to 2 Channel.
• Even if you set Audio Output Mode to
5.1 Channel, you'll only get sound from
all speakers when playing a 5.1 channel
multi-channel disc.
• When set to 5.1 Channel, only the front
left/right channels are output from the
AUDIO OUT (2ch) jacks. Change to 2
Channel if you want to listen to down-
mixed stereo audio (for example, because
you are listening through the TV's built-in
speakers).
• If you set to 2 Channel, Dolby Digital, DTS
and MPEG audio is mixed down to two
channels so you still hear all the audio
recorded on the disc. With DTS encoded
audio, you can choose how the signal is
downmixed to PCM audio. See DTS
DownMix above to change the downmix
setting.
2 Channel
5.1 Channel