Listening To Station Presets; Listening To Other Sources; Singing Karaoke - Pioneer HTD88DVD Operating Instructions Manual

Pioneer dvd/cd receiver operating instructions
Hide thumbs Also See for HTD88DVD:
Table of Contents

Advertisement

04
Getting started

Listening to station presets

1
Make sure the TUNER function is
selected.
2
Use ST +/– or the number buttons to
select a station preset.
• If you are using the front panel controls,
press TUNER FM/AM/ST. until you're in
station preset mode, then use the
and
preset.

Listening to other sources

You can connect up to three external sources
(TV, satellite receiver, etc.) to this system,
including one digital source. See also Listening
to TV audio through this system on page 16 and
Connecting auxiliary components on page 72.
1
If the system isn't already on, press
STANDBY/ON to switch on.
Also make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2
Select the source you want to listen to.
• If you're using the remote control, press TV
to select the TV input, or use the LINE (L1/
L2) button to select the LINE 1 or LINE 2
input.
• The TV/L1/L2 button on the front panel
switches between the three inputs.
3
If necessary, start playback of the
external source.
36
En
buttons to select a station
STANDBY/ON
L1/L2
TV
LINE

Singing karaoke

Using the karaoke features you can plug in a
microphone and mix the sound of your own
voice with a backing track. The backing track
can be anything you like, from a song on the
radio, to a dedicated DVD karaoke disc.
DIRECT PLAY
1
2
3
4
5
DVD/CD
STANDBY/ON
PHONES
MIC
1
2
3
4
5
MIN
MAX
1
Set the MIC LEVEL to minimum.
2
Plug in the microphone.
The mic jacks is located on the front panel.
• If the microphone has an on/off switch,
make sure it's on.
3
Load a karaoke backing disc or tape.
You can also use the radio or a component
connected to the auxiliary inputs as source
material for a backing track.
4
To change the mix (Video CD/Super
VCD only), press AUDIO.
Pressing repeatedly switches between:
• STEREO – Use for backing tracks with no
vocals
• L CH – Left channel only. Use for tracks
with the vocal recorded in the right channel.
• R CH – Right channel only. Use for tracks
with the vocal recorded in the left channel.
5
Play the backing track.
6
Adjust the MIC VOL knob to get the
sound you want.
To avoid unpleasant feedback, make sure you
don't point the microphone(s) at the speakers.
7
Sing!
• Depending on the microphone level, the
sound of the disc may distort. If this
happens, turn down the volume.
FM/AM/ST.
TUNER
TV/L1/L2
DISC SKIP
EXCHANGE
OPEN/CLOSE
VOLUME
CD MODE TIMER
DOWN
UP

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Htd8dvdS-dv8S-dv88Xv-dv8Xv-dv88

Table of Contents