Updating The Unit's Firmware At Power Off - Yamaha Aventage RX-A870 Owner's Manual

Updating the unit's firmware at power off

1
Read the on-screen description.
2
To set the firmware to update at power off, use the Cursor keys to select
"LATER" and press ENTER.
3
Press z (receiver power) to turn off the unit.
A screen asking you to confirm the firmware update is displayed.
LINK MASTER STEREO
SLEEP
OUT 2
Hi -R es ENHANCER
ECO
UPDATE ENTER
4
To start the firmware update, press ENTER.
After the firmware update is complete, the unit will turn off automatically.
Y
• The firmware update can be started by pressing INFO on the front panel.
• The unit turns off automatically without performing the firmware update if 2 minutes pass after the
screen to confirm the firmware update is displayed.
• To cancel the firmware update process, press RETURN, and the unit will turn off.
• The unit turns off without performing the firmware update if you turn off the unit with AV CONTROLLER
or MusicCast CONTROLLER.
TUNED ZONE
2 A 3 B
PARTY
YPAO VOL. A- DRC
MUTE VIRTUAL
FPL FPR
SBL SB SBR
140
En