Show Window - Samsung NP940X3M User Manual

Applications

Show Window

Show Window allows you to select an area on the screen and
show it in full screen mode on an external display. You can draw or
highlight items on the screen using the S Pen.
Before you use this application, you must connect the computer
to an external display.
Showing a selected area on an external display
1
Connect the computer to an external display.
You can connect with an external display cable or
wirelessly connect the computer. Refer to
for more information.
2
Select the Start button ( ) → Samsung → Show Window.
You can also open the Air Command panel and select the
Show Window shortcut.
3
Press and hold the Fn key and press the F4 key repeatedly,
then select Extend for project mode.
4
Select Start.
A frame for selecting area will appear.
5
Drag
select Done.
The selected area will be shown on the external display.
To fix the ratio of the selected area to the ratio of the external
External display
display, select
To stop displaying the screen, select Stop.
49
Start is activated only when the project mode is set to
Extend.
to select an area to show in an external display and
→ the Fixed ratio switch to activate it.