Windows 7 - Buffalo WMR-433 User Manual

Windows 7

To configure TCP/IP in Windows 7, follow the procedure below.
1
Open Control Panel.
2
Click Network and Sharing Center.
3
Click Change Adapter Settings on the left side menu.
4
Right-click the network adapter, then click Properties.
5
If the "User Account Control" screen opens, click Yes or Continue.
6
Select Internet Protocol Version 4 (TCP/IPv4) then click Properties.
7
To have DHCP set your IP address settings automatically, check Obtain an IP address automatically and Obtain DNS
server address automatically.
Alternately, you can configure the settings manually. Example:
If the router's IP address is 192.168.13.1,
IP address: 192.168.13.80
Subnet mask: 255.255.255.0
Default gateway: 192.168.13.1
Preferred DNS server: 192.168.13.1
Alternate DNS server: blank
8
Click OK.
16