Connecting Using The Component Video Output (Not Applicable To The European Model); Using The Scart Av Output (European Model Only) - Pioneer S-DV515 Operating Instructions Manual

Other connections
• Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging
in.
TV
OPTICAL IN
AUDIO
LINE 2
S-VIDEO VIDEO
OUT OUT
VIDEO
XV–DV515
• The S-video ouptut is switchable between
S1 and S2 formats for compatibility with
all TVs. See S-Video Out on page 64 for
more on this.
Connecting using the
component video output
Not applicable to the European model
If your TV has component video inputs, you
can use these instead of the standard video
output to connect this system to your TV. This
should give you the best quality picture from
the three types of video output available.
S-VIDEO
INPUT
AM
FM
ANTENNA
UNBAL 75Ω LOOP ANTENNA
Y P P
B R
COMPONENT VIDEO OUT
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT to a set of component inputs
on your TV.
TV
FM
ANTENNA
UNBAL 75Ω
Y P
B
COMPONENT VIDEO OUT
XV–DV515
• The component video ouptut is
switchable between interlaced and
progressive formats. See Component Out
on page 63 for more on this.
Using the SCART AV output
European model only
There are two different kinds of video outputs
you can use to connect this system to your TV.
The SCART output should give you better
picture quality than the standard composite
video output. The SCART AV connector
functions as both a video and audio output.
COMPONENT
INPUT
AM
LOOP ANTENNA
P
R
12
73
En