Important Information; Safety Precautions - Philips SLA5520 User Manual

EN
4

Important information

• A 802.11b/g compatible wireless network adapter or a wireless base station is required
when integrating your SLA5520 in a wireless computer network.
• Please install and connect the product in the order described in this manual only. This
assures best installation results with the least technical hassles.
• Please read this guide carefully before using your SLA5520 and keep it for future
reference.
• The most recent downloads and information on this product will be available through
our website www.philips.com/support.
• Broadband Internet access (min. 256 kbps) is required if you want to use the Internet
functions of the SLA5520.
• Please check whether your Internet service provider charges extra fees for exceeding a
certain limit of transferred data. When using Internet media services on a daily basis, you
may exceed such a limit. For example:
When you listen to Internet radio (at 64 kbps) for about 36 hours, 1 GB (gigabyte) of
data will be transferred to your streamium system.
• During set-up and installation, it may be helpful to have the instructions for your audio
system, wireless base station or other wireless network components at hand.

Safety Precautions

• NEVER MAKE OR CHANGE CONNECTIONS WITH THE POWER SWITCHED ON.
• Before operating the system, check that the operating voltage indicated on the
nameplate of your system is identical with the voltage of your local power supply. If not,
please consult your dealer.
• Radio equipment for wireless applications is not protected against disturbance from
other radio services.
• The product should not be exposed to liquids.
No object filled with liquids, such as vases, or beverage containers should be placed on
the product.
• Do not expose the system to excessive moisture, rain, sand or
heat sources caused by heating equipment or direct sunlight.
• Allow a sufficient amount of free space all around your SLA5520 for adequate
ventilation.
• Do not open this product. Contact your Philips retailer if you experience technical
difficulties.
• Place the system on a flat, hard and stable surface. When the system is switched to
standby mode, it is still consuming some power. To disconnect the system from the
power supply completely, remove the AC power plug from the wall socket.
• Make sure the air around your SLA5520 can circulate to prevent your SLA5520 from
overheating internally. Also, avoid putting any heat sources (e.g. a power amplifier)
underneath.
• To prevent your SLA5520 from overheating internally, never place anything on top of it.