State Of The Uninterruptible Power Supply - Siemens SIMATIC HMI KP400 Comfort Operating Instructions Manual

4.3.12.2

State of the uninterruptible power supply

If you have connected a UPS to a USB port of the HMI device, you can display the
monitoring status of this port.
Requirement
● The Control Panel is open.
● A UPS is connected to the 24 V DC connection and the USB port of the HMI device.
● The "Uninterruptable Power Supply (UPS) with USB support" option was transferred to
the HMI device with ProSave.
● UPS settings are configured.
Procedure
1. Open the "UPS Properties" dialog using the "UPS" icon.
2. Change to the "Current status" tab.
3. Refresh the monitoring status with "Update", if needed.
4. Confirm your entries with "OK".
The current monitoring state for the UPS is displayed.
See also
Setting the uninterruptible power supply (Page 155)
Comfort Panels
Operating Instructions, 07/2017, A5E36770603-AB
Commissioning the device
4.3 Parameter assignment for Comfort Panel
157