JVC KD-G401 Service Manual page 5

3.1.7 Removing the CD mechanism assembly
(See Fig. 7)
• Prior to performing the following procedure, remove the front
panel assembly, bottom cover, side panel, rear bracket and
main board.
• Remove the front chassis assembly as required.
(1) Remove the three screws H attaching the CD mechanism
assembly on the top chassis.
(2) Take out the CD mechanism assembly.
3.1.8 Removing the front board
(See Figs.8 to 10)
• Prior to performing the following procedures, remove the front
panel assembly.
(1) Remove the four screws J on the back side of the front
panel assembly. (See Fig.8.)
(2) Release the ten joints f and remove the rear cover. (See
Fig.9.)
(3) Release the joint g and take out the front board from the
front panel assembly. (See Fig.10.)
1-8 (No.MA051)
CD mechanism assembly
Fig.7
J
Fig.8
Joint f Joints f
Joints f Joints f
Fig.9
Front board
Joint g
Fig.10
H
Top chassis
H
J
J
Rear cover
Joint f
Front panel assembly