Toshiba MML-AP0124H2UL Service Manual page 75

No. Spare parts
PMV motor 1. Detachment
(1) Following to the works in 1 of
(2) Peel butyl rubber which is adhered to the PMV
2. Attachment
Following the works of 1 of
the parts as original by the reverse procedure.
* Control the tightening torque between PMV body and
PMV motor at 5.8 ± 0.7 ft•lbs (7.84 ± 0.98 N•m).
Fan assembly 1. Detachment
(1) Following to the works in 1 of
(2) Remove the fan motor lead from the clamp.
(3) Slide the glass tube fixing the fan motor lead and
(4) Take off the fixing screws of the fan assembly and
2. Attachment
Following to the works in 1 of
attach the parts as original in the reverse procedure.
Work procedure
detach the parts.
body, loosen the nut fixing the PMV motor with a
double spanner, and then remove the PMV motor.
(6), detach the parts.
remove the connector.
draw the fan assembly toward you.
(M4 screw: 2 pieces)
and (3) to (9),
and (1) to (2), attach
of (1) and (3) to
, and (1) to (3),
– 75 –
Remarks
PMV motor
PMV body
Clamp
Fan motor lead
Sliding direction Sliding direction Sliding direction
Glass tube
Connector